home page >> Company news >>Company news >> Four important indexes determining the application effect of talc in plastics
Details

Four important indexes determining the application effect of talc in plastics

Talc has significant strengthening effect on molecular compound plastics, but not all talc products have strengthening effect. The strengthening effect is very obvious with the different grades of products. It is difficult to put forward a unified and specific standard for talc powder used in molecular compound plastics industry. The general principle of plastic properties is: try to use pure talc products with suitable particle size, and the finer the product is, the better. The raw material source of talc must be stable, the product grade, especially the particle size distribution, the wet whiteness and color phase must be stable and continuous. In view of the diversity of talc ore, the best effect still needs the technical support of manufacturers.

When choosing the products, at least the "four degrees" of talc should be considered, that is, purity, whiteness, flake and fineness

Generally speaking, to evaluate the quality of a talc product, at least the above four factors should be considered. It is one-sided and incomplete to judge quality by only one index. If someone just

It is very questionable that the average particle size is used to determine the quality of talcum powder.

One purity

Purity refers to the content of talc in the product. There are impurities in talc in nature and industrial production. It is impossible for 100% pure talc products in industry to exist. There is no doubt that the higher the purity of talc, the better the strengthening effect. The results show that the properties of some impurities in talc not only reduce the purity, but also have a significant impact on the properties of the final product. The carbonate, metallic iron and heavy metals in talc have a very bad effect on the aging resistance and thermal stability of molecular compound plastics. Chlorite content has little effect on aging resistance and thermal stability. Therefore, low molecular weight carbonate talc should be selected in the production of carbonate talc in China.

The product purity of the main talc deposits in Liaoning, Shandong and Guangxi is relatively high. After screening, the purity can reach 96-98%, which is the most suitable talc raw material for modified molecular compound plastics in the world. However, there are still great differences in carbonate, metal, iron and heavy metals in the products of different manufacturers in different regions and the same region. At present, most of these high-purity minerals are exported, and there is less demand in China except for some joint ventures and wholly-owned enterprises. The content of talc in domestic market fluctuates from 20% to 98%. The strengthening effect of products with low talc content on molecular compound plastics is very limited, which mainly acts as general filler. However, if the content of carbonate and iron and heavy metals is high, it will cause the aging resistance and thermal stability of the products of molecular compounds.

For the determination of purity of talc, XRD + phase analysis is recommended for scientific research, and the deviation is within 5%. In production, the purity of talc can be estimated by testing the loss on ignition (except chlorite talc type). Generally speaking, the products with loss on ignition less than 8.0% are more suitable for molecular compound plastics as reinforcing fillers, and the best loss on ignition is less than 6.5%.

Biwhiteness

There are two kinds of whiteness in talc test: narrow sense and broad sense. The narrow definition of whiteness is the general definition of whiteness, which can be expressed by blue whiteness R457, y, L *, Ganz plastic characteristic whiteness and Hunter whiteness. There are no less than 100 formulas for whiteness calculation in the world, and no less than 10 formulas are often used in nonmetal mine light industry. Using different instruments, different calculation methods will get different results.

GB / T 5950 defines the measurement method and calculation formula of whiteness of talc. In this standard, CIE 1964 supplementary standard chromaticity system and standard illuminant D65 specified by gb3977 are adopted to calculate whiteness based on three constant stimulus values and chromaticity coordinates; CIE LAB uniform color space defined by gb7921 is used to calculate hue, chromaticity and color difference by lightness index and chromaticity index. The method is as follows: when the whiteness of ideal complete reflection diffusers with spectral reflectance of 1 is 100, and the absolute blackbody whiteness with zero spectral reflectance is zero, the three extraordinary stimulus values of the sample are measured according to the conditions specified in this standard, and then the whiteness is calculated by the defined formula, and the hue angle, chromaticity and color difference between samples can be calculated.

The generalized whiteness includes dry whiteness, wet whiteness and hue. The wet whiteness is the whiteness measured by adding appropriate amount of DMP (dimethyl phthalate) to the plastic properties of talc powder.

For the same raw material, the finer the particle size, the higher the whiteness. The higher the moisture content, the lower the whiteness. Although the whiteness has no effect on the physical properties of the product, it is very important to keep the color pure for the light color products. One of the disadvantages of talc is that the color of molecular compound plastics is more or less darkened after mixing, which is an important factor limiting the wide application of talc in molecular compound plastics. Through the measurement and comparison of dry whiteness and wet whiteness, we can qualitatively reflect the darkening extent of molecular compound plastic products caused by talc. Products with low wet whiteness make molecular compound plastics darken greatly. It should be noted that the wet whiteness of talc with high dry whiteness is not necessarily high. Generally speaking, only talc with high purity and high whiteness has high wet whiteness, which means that the color of molecular compound plastic products is less dark. The wet whiteness and color phase of talc powder used in molecular compound plastics industry mainly exist, y and L * should be as high as possible, while the absolute values of a *, b * should be as small as possible.

The wet whiteness of some products of the main talc deposits in Liaoning, Shandong and Guangxi can reach more than 70%. This part of the product is mainly exported, and the domestic demand is not large.

Of course, talc is good, but the price is also high. In recent years, the price of talc in China has risen rapidly because of the shortage of supply. With the further growth of demand for talc in molecular compound plastics industry, the situation of short supply will intensify. The shortage of talc in the world is not temporary. The short supply will be a long-term situation in the future, and there is no possibility of reversal. Therefore, low whiteness talc should be used whenever possible. In fact, in many applications, talc is not needed. Using talc is actually a waste. For example, in dark molecular compound plastics, there is no difference between using high whiteness talc and low whiteness talc. The results show that the whiteness of the final product increases by only 0.2-0.3 degrees when the wet whiteness of talc increases by 1 degree. It is meaningless to pursue the whiteness of talc unilaterally. In the past, due to the low price of high-grade talc in China, many users did not consider using it too much


contact number:

+86 18524322444

Company website:

www.zhongling-china.cn

Contact email:

sales@zhongling-china.cn

Contact address:

Yingkou area of China (Liaoning) pilot Free Trade Zone

CALL
Phone
18524322444
Technical Support£º º£³Ç¼Ñº½¿Æ¼¼ÓÐÏÞ¹«Ë¾ | Admin Login
º£³Ç¼Ñº½ÍøÕ¾½¨Éè-¸¶öÎ13464921787: seo seo